How To Determine The Ceiling Light Size For A Room Home Guides

August 12, 2018 1:28 am by sandiego

As the saying goes one should buy small ceiling fans for small rooms and large ceiling fans for large rooms while this may sound like an ancient proverb

Choose the right ceiling fan for your space

When it comes to lighting, there’s one all-important feature you’ll want to consider before style, finish or materials—size. We’ll break it into 3 simple specs to start your search off right

Make sure to account for equal space around each pendant. Use this formula to determine how much:

The spacing around and between lighting fixtures is also important, particularly in how it relates to surrounding furniture like a kitchen island or dining room table. Lighting used in the kitchen and dining room over a surface use the guidelines above, with slight adjustmentsmostly with regard to hanging height and diameter or width.

Begin with an open room, and note the room’s height, length and width.

In living rooms, bedrooms or open foyers, where people might be walking underneath a fixture:

Let’s start with some basic parameters before we add furniture to the mix. Note, these guidelines apply to ceiling lights like chandeliers, pendants and flushmounts in open rooms like living rooms and bedrooms.

Keep 7 feet of clearance from the bottom of the fixture to the floor. If you have an 8-foot ceiling, consider a low-profile flushmount to achieve the clearance and general lighting requirements for the room.

In an open foyer or hallway, hang chandeliers or pendants with the bottom at least 6″ higher than the door.

Standby, retrieving information, this process may take a moment.

Measure the length of the island/table in inches. Example: 60″ wide Determine how many pendants you want and the diameter of each. Add them up for a combined diameter. Example: 3 pendants with an 8″ diameter.

Combined diameter = 24″ Subtract the combined diameter from the length of the island. Example: 60″ – 24″= 36″ Add 1 to the number of pendants. This accounts for the space between each pendant and the ends of the island.

Example: Since we started with 3 pendants, we’ll tick this number up to 4. Divide your subtracted value by the number of pendants. Example: 36″ ÷ 4 = 9″. You’ll want to aim for 9″ of space in between each pendant.

To determine the height of a light fixture that’s best for your space:

W Nevius Kathleen Pender Scott Ostler Debra J Saunders Find&Save

When placing a fixture over a table, make sure the width or length is at least 1 foot shorter than the total length of the table (or 6″ smaller on each side).

If you prefer bigger pendants, go with even numbers using the same math above. For two fixtures, aim for each to be about 1/3 the width of the table or island below.

To determine the diameter of a light fixture that’s best for your space:

Hang between 28″ and 36″ from the bottom of the fixture to the table top.

A good rule of thumb is to hang mini or medium-sized pendants 66″-72″ off the floor to the bottom of each fixture.

Use an even number of large pendants over a kitchen island; each should measure about 1/3 the width of the surface below.

Depending on the room or placement of the fixture, the hanging length or height of a fixture is equally as important as the size. The clearance needed depends on the space the light is being used in.

Pendants and mini pendants are commonly used to provide ambient and task lighting over a kitchen island or work surface.

Getting it right in just about any room comes down to three important measurements: scale, clearance and spacing. Here’s how to figure each out:

Just like one wrong measurement can make or break a recipe, choosing the wrong sized light fixture can seriously disrupt the design mojo of your space. Designers recommend a happy medium between too big and too small; that way the fixture is harmonious with the scale of the space without overpowering or feeling oddly small.

Long rectangular or oval tables work well with linear suspension or multi-light pendant options. Square or round tables work best with a single pendant or chandelier placed right in the middle. Multi-lights are also appealing in this instance: try a round canopy multi-light for a more dramatic effect.

If you prefer multiples, smaller pendants lined across the table are just as much of a statement.

Start with the height of the room (floor to ceiling) in feet. Example: 10 feet high Multiply the height by 2.5″ to 3″ per foot. Example: 10 x 2.5″ to 3″ = 25-30 feet Swap that value to inches (so 20 feet becomes 20 inches).

Example: 25-30 feet > 25-30 inches This is the ideal height for a light fixture in this room.

Above the bathtub, keep 8 feet between the top of the tub and the bottom of the fixture. That can be a tall order for smaller bathrooms, so if the height doesn’t accommodate this rule, consider a smaller chandelier or hang at least 3 feet away from directly over the tub (keeping the 7-foot clearance rule in mind).

Measure the length and width of the room in feet. Example: 10 feet by 12 feet Add the two lengths together. Example: 10 + 12 = 22 feet Swap that value in feet for inches (so 20 feet becomes 20 inches) Example: 22 feet > 22 inches This is the ideal diameter for a light fixture in this room.

Example: 22 inches wide

So for this room, you’ll want to look for a light fixture around 22 inches wide and 25-30 inches tall.