If you have doubts about being able to complete this project safely, ask someone with experience to help or hire an electrician. If you have a light assembly on your ceiling fan already that has stopped working (and you have checked the light bulbs), you can follow these directions to replace the lighting assembly instead of the whole ceiling fan.
In some cases it may be less expensive and quicker to simply buy a new ceiling fan that already has a light attached to it. If you are having trouble finding a light kit for your existing ceiling fan you may just want to scrap it and start over with a brand new one.
Thanks to all authors for creating a page that has been read 33,471 times.
Turn off the circuit breaker that controls the power to your ceiling fan. Between the time you assessed whether you could possibly attach a light assembly and when you actually install it, you have probably turned back on the circuit breaker.
Make sure that you turn it off once again!
If you need to circulate air in your home, summer or winter, installing a ceiling fan may work for you. This article can help you to do this yourself.
Thanks to all authors for creating a page that has been read 7,770 times.
Turn the power back on and then turn on your fan. Enjoy your new fan.
Flip the circuit breaker back on, pull the chain, and check out your newly-improved fan! Now you should be able to feel a cool breeze from the fan while enjoying a brightly lit room.
To get started on your ceiling fan installation gather the tools and hardware needed (see below in “Things You’ll Need). The fan hardware is usually included with the fan.
I have a lightest hunter,I want to put a light on it but does it need a remote I don’t want the light on with the fan all the time or vise versa?
Connect the light’s wires to the fan’s wires with wire nuts. This should be done by simply lining up the two matching wires so that they are parallel and screwing a wire nut on the end, like you would a lid on a bottle.
In most cases you will be attaching wires that are the same color together. For instance if there is a white and a black wire in the ceiling fan and a white and black wire coming out the back of the lighting assembly, simply wire nut like colors together.
That being said, it’s best to follow any directions that have been supplied with your lighting assembly.
Flip off the breaker (or unscrew the fuse if you have an old fashioned fuse box) before doing any sort of electrical work. If you are unsure of which fuse or breaker controls the circuit you are working on, play it safe and turn off the whole panel.
A new light isn’t worth a trip to the hospital!
Assess whether there are wires inside the housing for a lighting assembly. Because you will want to be able to control the light and the fan separately, there will need to be existing wiring inside the housing to allow light assembly operation.
You should see several wires inside the housing that are capped off by themselves with wire nuts. They could be a variety of colors but most likely will be black (power) and white (neutral). With any luck the wires inside the housing will even be labeled with something like “lighting power” or something like that.
This is a very good sign that you will be able to attach a lighting assembly.
Install the u-bolt over the brace bar as well as through the bottom of fixture box and adapter plate. Run the wire into the mounting box of the fixture. Make sure the face of the box is flush with the ceiling.
Two Parts:Assessing If You Can Attach a Light FixtureAttaching a Light Fixture onto a Ceiling fanCommunity Q&A
Ceiling fans come in a wide variety of styles and designs. Many ceiling fans are sold without a light attached to them but that doesn’t always fit the needs you may have in a room. If you already have a ceiling fan but it doesn’t have a light, it doesn’t mean you can’t have a light unless you totally replace the fan. You may be able to add one to your existing fan by following these simple directions.
With the black wire; the blue wire supplies power to the light fixture.
If you know that the bulbs are good, recheck the wiring harness connection. You need to push the connections together until they click.
Determine whether the bottom of your ceiling fan has a housing cap. This is the area at the center of a ceiling fan where an optional light assembly will go. Unscrew any screws in this area and pull off any decorative plates or covers that are concealing light attachment points and wires.
Some ceiling fans will not accommodate the addition of a light kit but quite a few will. Many times when a ceiling fan is designed, it can be built with an optional lighting assembly. This way a company can use the same parts for both a cheaper product, with no light, and a more expensive one, with lights.
Because of this, adding a light to your ceiling fan may be a quick and easy job. If your ceiling fan has no housing assembly at the center of it, then you will not be able to attach a lighting assembly.
Be sure there is no housing cover before you give up, as the way they are attached can be hidden with decorative details, such as an embellished cover.
Install light bulbs, glass shades, and pull chains, following the directions provided by the manufacturer. Usually shades on ceiling fixtures are held in place with thumbscrews, which, when screwed in, simply keep the shades attached with a light amount of pressure on multiple sides of the shade.
Is it necessary to have a dedicate toggle on the wall plate to operate the fan?
It doesn’t actually matter for standard rooms. As long as the fan is on, the air will be circulated. But, for great rooms, cathedral ceilings, and stairwells you want the blades to spin counter-clockwise (according to my blades) to blow the air directly downward and block heated air from rising and being wasted.
With two white and two black wires coming into the fixture from fuse panel, how do I connect the white, black, and blue wires from the fan/light kit?
Screw the lighting assembly onto the ceiling fan. This attachment should go smoothly, especially if you have purchased a lighting assembly designed to be attached to your ceiling fan.
Select the correct size. It is important to buy the right size fan for the intended room, consider the following guidelines for the right size fan: If the room dimension is 12 feet (3.7 m) or less, you need a 36-inch fan If the room dimension is 12 to 16 feet (3.
7 to 4.9 m), you need a 48-inch fan If the room dimension is 16 to 18 feet (4.9 to 5.5 m), you need a 52-inch fan
Measure the attachment point on your ceiling fan. Now that you know you have power for a lighting assembly, you will need to know the size lighting assembly you need to find. Measure the diameter of the opening and pay attention to where screw holes should be located on a lighting assembly in order to attach easily to your existing ceiling fan.
Also make note of the company and style name or number of your ceiling fan. Parts from the same company are more likely to fit your existing fan.
Unscrew the cap hiding the wires and set it aside. Be sure to keep track of the parts you are removing. You will probably no longer need the cap but you may need any screws that it was attached with.
Possibly some internal wiring has been messed up in the fan, or the light has not been screwed in properly.
A ceiling fan installation will help keep your room cooler during the warm months and warmer during the cooler months. A ceiling fan installation fan is not difficult. For most homeowners it is an easy-to-do DIY project. Using an existing ceiling light fixture for a ceiling fan installation is the easiest method.
Include your email address to get a message when this question is answered.
Visit a home improvement store to find the appropriate ceiling fan light kit. If you cannot find the right part, don’t hesitate to ask someone working at the store to help you. Some companies sell universal ceiling fan lighting kits that fit a variety of their models.
Make sure to check that the style name or number of your fan is listed as an acceptable match for the lighting assembly you buy. If you cannot find the right lighting assembly at a home improvement store try elsewhere.
A lot of cities now have companies that salvage construction parts and resell them to the public. You should also look online at the website of the company who manufactured you ceiling fan. They may sell directly to the public or the site may direct you to a company that does.
Ceiling fan lighting assemblies come in a variety of styles. For instance, you will need to decide whether you would like to attach a fixture that has one, two, or three light bulb sockets.
Awesome picture! Tell us more about it? Click here to share your story.
Did you try these steps?Upload a picture for other readers to see.
Attach the fan wires to the incoming circuit wires inside the fixture box using wire nuts. Attach the black wires together, attach the white wires together, and attach the bare wire to the green wire (ground).
Secure the fan to the fan box using the mounting bolts and install the canopy to cover the ceiling holes and fixture box. Install the fan blade if not installed.
Position the box in the ceiling cutout. The bars holding the mounting box are then twisted to extend the braces.
Be aware that ceiling fans are designed with and without light fixtures. Ceiling fans with light fixtures permit you to add additional lighting to your room. The fan will work with air conditioning or with open windows to cool your home.
During winter a ceiling fan operating in reverse helps to circulate the warmer air that collects at the ceiling.
What could be wrong if I have power to the fan, but no power to the light?
By using this service, some information may be shared with YouTube.
Turn off the power. Before starting, turn off the power at the main circuit breaker panel. If you are not sure which breaker to use, then turn off the master breaker to the entire house.
Русский: установить осветительный прибор на потолочный вентилятор, Português: Instalar uma Lâmpada em um Ventilador de Teto
Attach the stove bolts to the adapter plate in the fixture using the lock nuts. Test the fixture box to ensure it will hold the weight of the fan. If for some reason it does not hold, a metal brace will be needed to be installed between the joists.
In most cases, the canopy of the fan will cover any holes that are drilled into the ceiling.
Turn off the power to your existing ceiling fan. Begin any project involving electricity by turning off the source of power. This does not just mean flipping off the switch on the wall, as it could easily accidentally get turned back on mid project.
Instead, go to your circuit box and turn off the whole circuit. If you are unsure of which circuit you are working on, play is safe and just turn off the whole panel. A few minutes of no power is worth your safety.